Titanium Hybrids

» Innovations » Titanium Hybrids

Titanium hybrids are Hybrid Electronics' own Patented (provisional) technological development. Titanium is the material for the future.

Top Ten Things you should know about Titanium:
  • Titanium has a low density.
  • Titanium has good lightweight strength.
  • Titanium is easily fabricated.
  • Titanium can withstand extremes of temperature.
  • Titanium has an excellent resistance to corrosion (especially sea water).
  • Titanium is more flexible than steel.
  • Titanium is stronger than steel.
  • Titanium is much lighter than steel.
  • Titanium makes an excellent hybrid!
  • Titanium is expected to be cheaper than Stainless Steel in the coming years.

Why make Titanium Hybrids?

Hybrid Electronics Titanium hybrids have the following benefits: —
  • Improved strain sensor sensitivity over Stainless Steel by two to six times, depending on the Grade or Alloy of Titanium chosen.
  • Improved strain sensor temperature co-efficient of resistors (TCR) (i.e. change of resistor value over temperature) under 100 ppm/oC and as low as 50 ppm/oC. Hybrid Electronics can tailor the TCR for the end product.
  • Increased strength up to three times that of Stainless Steel.
  • Nine times better flow sensing sensitivity over Stainless Steel.
  • Co-located Heater and Thermistor element flow sensing (including flow direction sensing) and very low power applications.
  • Flow measurement for liquids and gases.
  • Thick (>2mm) and thin (<0.4mm) Titanium substrates can be used depending on application.
    Mains voltage applications.
  • The "Hybrid is the box". It does not require to be mounted in a box.
  • Versatility of environments eg. water, extreme high and low temperatures, under ground and in the atmosphere.
  • Titanium hybrids do not replace Stainless Steel or Ceramic hybrids. Titanium hybrids expand the applications for thick film hybrids.
Titanium Hybrids have inherent advantages over PCB's. Not only can they stand the heat, but also, they:
  • are smaller in size;
  • are more reliable;
  • can be encapsulated for secrecy;
  • offer greater precision, and;
  • do not require mounting in a box.

Hybrid Electronics gives you next generation technology!

Hybrid Electronics Australia Pty. Ltd. Factory 6, 56 Smith Road, Springvale Victoria 3171 Australia
Ph: +61 (3) 9574 2232  E-mail: hybrid@hybrid-electronics.com

© Copyright 2017 Hybrid Electronics Australia Pty Ltd. All rights reserved.
The content and format of this website are subject to copyright and may not be reproduced without permission.

Site designed and developed by Cast Creative Multimedia Solutions Pty Ltd